UA-41925212-1

ALINCO DJ596 ( Discontinued )

ALINCO DJ596 ( Discontinued )
Product Code: DJ-596
Availability: In Stock
Price: IDR0
Qty:  
   - OR -   

Specifications


General
Frequency range
E:TX&RX 144-145.995MHz
430-439.995MHz
T: TX: 144-147.995MHz / 420-449.995MHz
RX: 136-173.995MHz / 400-511.995MHz
Operating mode F2(1200bps)/8K50F3E/16k0F3E/F1E(Op: digital)
Channel steps 5, 10, 12.5, 15, 20, 25, 30KHz
Memory channel 100 channels + 2 quick recall (CALL)
Antenna Connector BNC (50ohm unbalanced)
Frequency stability +/- 2.5ppm TCXO
Power supply requirement 6.0 - 15.0V DC negative ground
Current drain Approx. 1.2A TX VHF at 13.8V DC
Approx. 1.4A TX UHF at 13.8V DC
Approx. 75mA squelched
Approx. 25mA battery save ON
Usable temperature range -10 - +60c (14 - 140F)
Dimensions (w/o projection
EBP-50N battery included)
56mm(W) x 124mm(H) x 36.5mm(D)
2.2''(W) x 4.88"(H) x 1.44"(D)
Weight Approx. 310g (11oz) with EBP-50N
and EA98 whip antenna
CTCSS tone encoder/decoder 39 tones
Digital Coded Squelch encoder/decoder 104 codes
Transmitter
Output power Approx. 5W at 13.8V DC V/UHF
Approx. 4.5W VHF with 9.6V packs
Approx. 4.0W UHF with 9.6V packs
Approx. 2.5W V/UHF with EBP-56N
Approx. 0.8W Low position V/UHF
Modulation system Variable reactance frequency modulation
Spurious emission Less than -60 dB
Maximum frequency deviation +/- 5 KHz
Receiver
Receive system Double-conversion superheterodyne
Sensitivity (-12dB SINAD) Less than -15.0dBu
Selectivity -6dB: 12KHz or more
-60dB: 30KHz or less
Audio output power More than 200mW(8ohm 10%THD)

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Matahari Electronic © 2018